打印金属基生物材料工艺和临床应用的问题与趋(7)
【作者】网站采编
【关键词】
【摘要】[8]PATTANAYAK DK, FUKUDA A, MATSUSHITA T, et al. Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments. Acta Biomater. 2011;7(3):1398-14
[8]PATTANAYAK DK, FUKUDA A, MATSUSHITA T, et al. Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments. Acta Biomater. 2011;7(3):1398-1406.
[9]SAMES WJ, LIST FA, PANNALA S, et al. The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016;61(5):315-360.
[10]GOKULDOSS PK, KOLLA S, ECKERT J. Additive Manufacturing Processes:Selective Laser Melting, Electron Beam Melting and Binder Jetting-Selection Guidelines. Materials. 2017;10(6):672.
[11]TYRALLA D, SEEFELD T. Advanced Process Monitoring in Additive Manufacturing. PhotonicsViews. 2020;17(3):60-63.
[12]HARUN WSW, KAMARIAH MSIN, MUHAMAD N, et al. A review of powder additive manufacturing processes for metallic biomaterials. Powder ;327:128-150.
[13]KUMAR A, MANDAL S, BARUI S, et al. Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment. Mater Sci Eng R. 2016;103:1-39.
[14]SPENCER OO, YUSUF OT, TOFADE TC. Additive Manufacturing Technology Development: A Trajectory Towards Industrial Revolution. Mech Ind Eng.2018;3(5):80-90.
[15]PODSHIVALOV L, GOMES CM, ZOCCA A, et al. Design, Analysis and Additive Manufacturing of Porous Structures for Biocompatible Micro-Scale CIRP. 2013;5:247-252.
[16]HAMIDI MFFA, HARUN WSW, SAMYKANO M, et al. A review of biocompatible metal injection moulding process parameters for biomedical Sci Eng C. 2017;78:1263-1276.
[17]SHAH FA, SNIS A, MATIC A, et al. 3D printed Ti6Al4V implant surface promotes bone maturation and retains a higher density of less aged osteocytes at the bone-implant interface. Acta Biomater. 2016;30:357-367.
[18]ZHANG LC, ATTAR H, CALIN M, et al. Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications. Mater Technol. 2016;31(2):66-76.
[19]AZIZ IA, GABBITAS B, STANFORD M. Direct Metal Laser Sintering of a Ti6Al4V Mandible Implant. Key Eng Mater. 2012;520:220-225.
[20]ASSIOTIS A, TO K, MORGAN-JONES R, et al. Patellar complications following total knee arthroplasty: a review of the current literature. Eur J Orthop Surg Traumatol. 2019;29(8):1605-1615.
[21]GAO CH, WANG CY, JIN H, et al. Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics. RSC Adv.2018;44(8):-.
[22]TAN XP, TAN YJ, CHOW CSL, et al. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility. Mater Sci Eng C. 2017;76:1328-1343.
[23]SIDAMBE AT. Biocompatibility of Advanced Manufactured Titanium Implants-A Review. Materials. 2014;7(12):8168-8188.
[24]MACBARB RF, LINDSEY DP, WOODS SA, et al. Fortifying the Bone-Implant Interface Part 2: An In Vivo Evaluation of 3D-Printed and TPS-Coated Triangular Implants. Int J Spine Surg. 2017;11(3):16.
[25]WYSOCKI B, IDASZEK J, ZDUNEK J, et al. The Influence of Selective Laser Melting (SLM) Process Parameters on In-Vitro Cell Response. Int J Mol Sci.2018;19(6):1619.
[26]PALMQUIST A, SNIS A, EMANUELSSON L, et al. Long-term biocompatibility and osseointegration of electron beam melted, free-form-fabricated solid and porous titanium alloy: experimental studies in sheep. J Biomater ;27(8):1003-1016.
[27]ZANGENEH S, LASHGARI HR, ROSHANI A. Microstructure and tribological characteristics of aged alloy. Mater Des. 2012;37(5):292-303.
[28]KOUTSOUKIS T, ZINELIS S, ELIADES G, et al. Selective Laser Melting Technique of Co-Cr Dental Alloys: A Review of Structure and Properties and Comparative Analysis with Other Available Techniques. J ;24(4):303-312.
[29]LU Y, WU S, GAN Y, et al. Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application. Mater Sci Eng C. 2015;49:517-525.
[30]HAZLEHURST K, WANG CJ, STANFORD M. Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic Des. 2013;51:949-955.
[31]WANG L, KANG J, SUN C, et al. Mapping porous microstructures to yield desired mechanical properties for application in 3D printed bone scaffolds and orthopaedic implants. Mater Des. 2017;133:62-68.
[32]SAHASRABUDHE H, BOSE S, BANDYOPADHYAY A. Laser processed calcium phosphate reinforced CoCrMo for load-bearing applications: Processing and wear induced damage evaluation. Acta Biomater. 2018;66:118-128.
[33]HAN P, CHENG P, ZHANG S, et al. In vitro and in vivo studies on the degradation of high-purity Mg (99.99wt.%) screw with femoral intracondylar fractured rabbit model. Biomaterials. 2015;64:57-69.
[34]HAUDE M, INCE H, ABIZAID A, et al. Safety and performance of the second-generation drug-eluting absorbable metal scaffold in patients with de-novo coronary artery lesions (BIOSOLVE-II): 6 month results of a prospective, multicentre, non-randomised, first-in-man trial. ;387():31-39.
文章来源:《中国口腔颌面外科杂志》 网址: http://www.zgkqhmwkzz.cn/qikandaodu/2021/0422/420.html
上一篇:快速牙弓夹板成形钳
下一篇:两种托槽对双颌前突患者正畸性根尖外吸收影响